Double Glazed Window Repair
It's worth looking over the warranty included with the majority of double-glazed windows. It usually covers any problems with window hardware, including hinges and locking mechanisms, within the first 10 years.
Mist in between glass windows is usually caused by a crack in the seal and requires immediate repair to prevent mould or damp from forming in your house.
Condensation Between the Windows
If you notice condensation appearing between your windows, it is an indication that the sealing in the insulating gases has failed. This is a serious issue that should be addressed immediately, especially during the winter months when humidity levels are at their highest. It can also cause damage around the sills and sealant, and even mildew or mould.
Ideally, double-glazed windows should never experience condensation between the panes. This issue is often caused by extreme humidity or a cold snap. This problem is usually resolvable without the need to replace an entire window. A professional can make small holes in the glass and spray the inside of the window with a special cleaning solution. The water is then removed from the window and an anti-fogger device may be installed to stop further accumulation of moisture in the future.
Condensation in the windows could be caused by air leakage, or other factors outside of the window. In this instance it could take longer for moisture in the window to build up, as the air must be sufficiently warm to evaporate the water molecules. In these instances it is best to replace double-glazed windows instead of to try to repair the sealed units.
A double-glazed glass window is comprised of two or more pieces of tempered insulated glass, which are joined by a metal frame. The gap in the middle of the windows is filled with a non-toxic insulating gas like argon or Krypton and then sealed. The seal is responsible for preventing the insulating gas from escaping and also preventing air and moisture from getting through the gap.
As windows age, seals get damaged and allow moisture to escape between the glass panes. When the seals leak, it is important to be aware of this since it signifies that the double glazing is no longer performing the way it did in the past. This could lead to lower efficiency in energy use, higher heating bills, property damage, and the risk of condensation developing between the windows.
Mist
If you have condensation on the outside of your windows, this is totally normal - it means that your double glazing is functioning properly and retaining the heat in your home. The condensation develops because the outside air is more warm than the glass, and reaches its dew point before the window. This is one of the major advantages of having high-quality double glazing.
If you notice condensation on the inside of your window, this could be a sign of a ventilation issue in your home. This is because the extra moisture has nowhere to go and is deposited on your windows as well as in carpets, on furniture and in other places in your home. Getting this checked out by a professional and making sure that there is plenty of fresh air flowing through your home will help prevent it in the future.
Another reason for mist on double-glazed windows is because the seal between two glass panes is broken. This could be due to wear and tear or through the use of chemical cleaning products. The best option is to fix the windows as soon as you can.
Repairing your windows professionally will ensure that they remain waterproof and free of condensation, fogging and misting. It is also less expensive than replacing the windows, and you'll save money on your energy bills.
A FENSA certified window installer can provide you with a quote for repair or replacement of your double glazed windows. If your existing windows are old and have been in use for a while you may want to think about upgrading them to new A-rated energy efficient ones.
It is a great idea to keep copies of any warranties and agreements with your window fitters. This can be extremely helpful in the event that any issues with your windows occur in the future, and you can then contact your window fitters to resolve these issues. This is a much better option than not addressing the issue, which will only get worse and may lead to other problems in the home.
Open or close with difficulty
Double-glazed windows become difficult to open and close, it's not just a nuisance but it could also result in higher energy bills because of the loss of heat and draughts. It could also be security risks, particularly when the locks aren't working properly. It is crucial to address any problems with double glazed windows and doors immediately you spot them.
If you have tried to open your window using one of the easiest methods, such as using an electric screwdriver or tapping the frame using a solid object, the problem could be more serious. It could be that the window has shifted within its frame and requires to be re-set or there is gaps between the glass panes and the frames. In either of these scenarios, you must contact a professional double glazing repair expert to ensure that the correct repairs are made and to prevent any further problems.
It's not uncommon to find UPVC upvc replacement door handles window handles and lock mechanisms to get stuck or hard to operate, especially when they are worn out and worn. This is due to an accumulation of dirt or grease within the handle. It can be resolved by cleaning it using a uPVC cleaner. If this doesn't help, you can try gently tapping the uPVC frame with a hard object, such as an screwdriver, but be careful not to damage the handle or the window handle mechanism.
If this does not resolve the problem then the window may need to be replaced as it is likely that the hinges are no properly aligned or the locking mechanisms are damaged. In this situation, consult a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or shut double glazing window. He has vast experience changing old window mechanisms to modern ones and often can save you the cost of replacing the entire window. For more information or to request an appointment for a free quote, contact us by phone or email us today.
Warping
Double-glazed windows can be the ideal way to cut down on energy in your home. They are composed of two panes that have a spacer or dense gas between them. This creates a seal that keeps cold air out and warm air inside. Over time, however, these windows may be damaged or broken and require repair. Most repairs can be done without replacing the entire window.
Warping is a frequent issue when double-glazed windows are installed. This happens when the windows begin to bow or twist, or bow. This can affect the structural integrity and insulating abilities of the window. Double glazed windows should be properly installed and maintained to avoid this issue.
If your double-glazed windows are beginning to swell, it's crucial to get in touch with a specialist immediately to prevent the problem from getting worse. They will be able to examine your windows and identify the reason for the warping. They will then use specific tools to correct the issue and make sure that your windows are completely sealed.
A common cause for this issue is the presence of water vapour in the windows which can build up over time. This can be caused by many factors, including the weather, humidity levels and temperature changes. To fix this the expert will drill a small hole through the glass to let out the moisture. The specialist will apply an agent for cleaning on the glass to clean it and then apply sealant.
If your windows can't be shut or opened, it could be due to a broken mechanism or hinges. Before calling a professional to fix the issue, it's worth lubricating the parts. This can usually fix the issue and reduce your need for replacements. If your windows are worn out or do not provide the insulation you require It may be better to replace them.